Specifications: 

• Size: 106cm x 31cm x 6cm  –  41.7 x 12.2 x 2.4inches
• Material: Reinforced, UV Stabilized Nylon, 10-ton Capacity
• Weight: 5.1kg per pair of Tracks  –  11.24 pounds
• Raised tracks help prevent vehicle tires from spinning
• No towing or pushing required

HOW TO USE

CLICK DETAILED INSTRUCTIONS: HOW TO USE RECOVERY TRACKS?

When stuck, STOP! Don’t keep spinning the tires- it won’t work.

Step 1:  Use a shovel to get underneath the tires. Dig a track in front of ALL tires to make a roll-out path. The goal is to reduce resistance so you can keep your momentum.

Step 2:  Reduce tire pressure to a minimum amount you are comfortable with. X-Bull recommends carrying an air compressor, it’s essential when off-road or in remote areas.

Step 3:  Position tracks against the tires so the tire will grab a cleat and pull the track underneath the tire. DO NOT SPIN THE TIRES, as this will burn the cleats off the tracks. Maintain a steady throttle until you feel the vehicle rise-up, then increase the throttle until you are free and able to gain traction.

Suggested Tire Pressure*

Rocky terrain: 15 psi

Soft Sand: Deep silt, soft sand – 8 psi

Beach sand: 10-12psi 

Mud: 15psi depending on bottom (compensate for rocks/holes/branches)

*Suggested tire pressures should be adjusted to meet the requirement of the vehicle.